Details:
- Finish: Red
- Position: Rear
- Diameter: 32mm
- Adjustable: Yes
- Material: Steel
- Bushing Included: Yes
- Bushing Type: Polyurethane
- Durometer: 88
Features:
- Designed for Camaros with FE4 rear suspension systems (2012-15 ZL1, 2013-15 SS)
- Greaseable 88-durometer polyurethane bushings
- Thrust washers allow for proper location of the sway bar and prevent lateral movement
- Cold-formed to better resist torsional fatigue
- 3-hole adjustable
- 25-200% increase in sway bar rate
- Dramatically reduces body roll
- Greater sway bar control allows for better handling of your vehicle
Reduce body roll and improve the handling of your Camaro with a Rear Sway Bar Kit from BMR Suspension! Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMRÂ’s Adjustable Rear Sway Bar Kit (SB033) increases sway bar rate over the OE bars and is designed for street performance, autocross, and road racing applications.
Note: BMRÂ’s SB033 is designed as a direct replacement for FE4 rear suspension systems where the sway bar end links are located outboard of the rear shocks. 2010-2012 Camaro SSÂ’s may upgrade to this FE4 bar if the rear lower control arms and rear sway bar end links are upgraded to FE4 spec.
Below are rate specs compared to available OE bars:
- OE SS Bar (FE4)
- Hole 1 = 100% increase in sway bar rate
- Hole 2 = 150%
- Hole 3 = 200%
- OE ZL1 Bar (FE5)
- Hole 1 = 25% increase in sway bar rate
- Hole 2 = 40%
- Hole 3 = 75%
Installation Instructions (opens in new tab): Click HERE
Part Number: SB033R
